RTR Truck Trial HOBBYTECH CRX18 Flat Cage 4x4 - Sand

The new version of the Flat Cage CRX18 takes on the characteristics of the CRX18. It differs in that it has a rear platform equipped with a roll bar and a spare wheel. Other realistic accessories also complete this model. The cage version is slightly shorter and the rear platform allows for a greater attack angle. The CRX18 flat cage is available in sand and silver colors.

The CRX 18 is a 1/18th scale reproduction of the iconic CRX: the emblematic model of our brand.

The mini is designed as a 1/10th scale: metal beam chassis, central transmission box (positioned slightly forward) with a low-positioned motor and two bridges that are each connected to the chassis by 4 links.

The 3-wire micro servo steering is a standard plug-in model. To lower the center of gravity as much as possible, it is located on the front bridge (AMS mount). The motor is powered by a 55T carbon micro motor.

In terms of electronics, the CRX18 is equipped with an all-in-one module (receiver – ESC) that has 9 sockets for connecting a complete ignition system with turn signals and brake lights. By default, the CRX is equipped with 2 LED headlights that can be controlled via the radio control. Finally, the battery is a 2S 600 mAh that allows for several hours of driving.

In terms of aesthetics, the CRX18 is a faithful reproduction of its big brother. The bridges have the same design as those equipped on the CRX2. The body has the same grille and the same accessories (jerry can, snorkel, wipers and mirrors). Finally, the tires are an exact reproduction of the Climbers. A nice little detail: the footboards are equipped with a slot in which the bottom of the body fits in order not to damage it on obstacles.

Many options will be available to improve the performance or look of the CRX18: ball bearings, hydraulic shock absorbers…

The CRX18 can be driven indoors or outdoors. It is suitable for both small and large spaces. Its crossing capabilities are impressive. On rocks: its lightness, balance and efficiency of its tires allow it to overcome incredible obstacles. The radio allows you to adjust the end stops (throttle and steering). The throttle adjustment allows you to fine-tune your driving and adapt the speed of the CRX18 to the terrain and obstacles.

Dimensions:

• Wheelbase: 153.70mm
• Total length: 241.50mm
• Width: 123.8mm
• Height: 120.60mm
• Ground clearance at transmission box level: 39.70mm
• Ground clearance at bridge level: 17.1mm
• Front approach angle: 59°
• Rear approach angle 76.9°

• CRX18 4x4
• Transmitter
• 600 mAh 2S battery
• USB charger

• 4 LR6 (AA) batteries
• Various model making tools